Roofing Contractor in Boca Raton, FL

Published local figures put most Boca Raton replacements somewhere between about $4,200 and $26,600. Asphalt shingles are commonly reported at roughly $4–$7 per square foot installed and tile at about $12–$25 per square foot. Your real number depends on roof size, pitch, tear-off layers, decking repairs, permits and the system you choose, which is why we give a written, itemized scope after inspecting the roof.

Often, yes. A cracked tile, a failed pipe boot, lifted shingles or a bad flashing detail can usually be repaired when the surrounding underlayment and decking are still sound. Recurring leaks in different spots, widespread granule loss, soft decking or underlayment that has reached the end of its life are the signs that replacement is the better use of your money.

Stay off the roof, move furniture and electronics away from the water, contain drips with buckets and towels, and take wide and close photos of the ceiling and any visible roof damage. Note when the leak started. Then call us at (831) 666-1600 so we can stop the water and assess the cause. Wet drywall and insulation should be dried within 24–48 hours to limit mold.

Follow your policy’s reporting rules and notify your insurer promptly after storm damage. You can still arrange emergency protection such as a tarp and a professional inspection while you wait. We document what we find with labeled photos and a written scope you can share with your adjuster, but no contractor can promise that a claim will be approved.

Search the contractor’s exact business name or license number on myfloridalicense.com, the Florida DBPR portal, and confirm the license is active and in a roofing or general contractor category. Ask for current liability insurance and workers’ compensation coverage or a valid exemption before paying any deposit.

A re-roof generally requires a permit. Addresses inside the City of Boca Raton go through the city’s Building Department, while unincorporated West Boca communities go through Palm Beach County Planning, Zoning and Building. Your contract should state who pulls the permit, who schedules inspections and what records you receive when the job closes out.

The drier months from November through April are the easiest time to schedule a planned re-roof, because afternoon storms are less frequent and there is no post-hurricane backlog. Rainy season runs roughly May through October. Never wait for the dry season if you have an active leak or wet materials; those need attention right away.

Most single-family shingle re-roofs take a few working days once the permit is issued, while tile roofs take longer because of underlayment inspections, tile loading and setting. Weather, deck repairs, permit inspections and material deliveries all affect the schedule, so your written scope should list the start window and how weather delays are handled.

Tile roofing in Boca Raton is commonly reported at about $12–$25 per square foot, with typical projects in the $18,000–$45,000 range, and tear-off can add roughly $1–$2 per square foot. Those are planning figures, not a quote. Ask whether an estimate includes underlayment, flashing, tile breakage, decking, disposal, permits and wind documentation.

There isn’t one answer. Concrete or clay tile suits most Boca subdivisions and HOA communities, architectural shingles are a lower-cost option for ranch homes and villas, and flat sections need a membrane and drainage plan. Near the ocean and Intracoastal, corrosion-resistant flashing and fasteners matter. The right choice depends on the structure, attachment, drainage, budget and HOA rules.

Water that sits on a flat or patio roof after rain keeps pressure on the membrane, seams and penetrations and can slowly saturate insulation and decking. That speeds up wear and leads to leaks. A roofer should check drains, scuppers, slope, membrane condition and hidden moisture before recommending a coating, repair or replacement.

Compare at least three written estimates when you can, and compare scope rather than the headline price. Line up tear-off, decking allowance, ventilation, permits, product approvals, materials, labor, cleanup, warranty, change-order rules and payment milestones so you are comparing the same job.

Ask about manufacturer coverage and workmanship coverage separately. Get the length of each in writing, along with exclusions for storm damage, salt-air corrosion, ponding or existing conditions, any maintenance required to keep coverage, transfer rules and who performs warranty work.

Yes. A roofer can inspect the roof, take labeled photos and measurements, and write a repair scope that separates storm damage from normal wear, which you can share with your insurer or adjuster. A contractor cannot promise approval, negotiate the claim for you or waive your deductible, which is illegal in Florida. Coverage depends on your policy and the insurer’s review.